Shashvath Fabrication and Engineerings

  • Home
  • Communicating Mill

COMMUNICATING MILL

Communicating mill is used for the downsizing, milling, pulverization and dispersion of wet and dry products in pharmaceutical, chemical, food, cosmetics, fertilizers industry etc.
The product is poured from the top through in feed hopper and material falls on the rotor blades beater assembly for milling or pulverization. Due to the knife edges mounted on rotor, the downsizing of particle takes place and through sieve material gets pushed outward from the bottom opening. Knife edges can be removed for cleaning very easily.

CONSTRUTION & OPERATION

The product is poured from the top through an in-feed hopper, and the material falls on the rotor blades beater assembly for milling or pulverization. Due to the knife edges mounted on the rotor, downsizing of particles takes place, and through the sieve, material gets pushed outward from the bottom opening. Knife edges can be removed for cleaning very easily.

  • GMP point of view machine is provided with S. S. cladding on the base, S. S. belt guards, S. S. cover on the motor. No exposed painted surface on top of the machine. Motor rails, screws, and guide rods are chrome-plated.
  • Beaters assembly bearings are in separate pillow blocks for ease in maintenance.
  • Very little downtime as only the beaters assembly will have to be reversed (and not the complete chamber) for making it knife to impact forward or vice-versa, which can be done by a single operator.
  • Fixed beaters assembly is provided as standard supply which increases the output by 10% to 30%, reduces noise level, and also makes it easier to clean as there are no cavities. (If the product demands, swing beaters assembly can be provided.)
  • Beaters and shaft are of stainless steel 410 quality, and beaters are further hardened and chrome-plated. Beaters are fitted on a splined shaft.
  • Transmission of heat to the chamber from bearings is minimum as they are away in separate pillow blocks. This facilitates, to some extent, in processing heat-sensitive products.
  • Castors provided for mobility, and brakes can be applied for fixing the machine at one place.
  • Machine is available in plain & water-jacketed models. Flame-proof electricals can be provided on demand at extra cost.

TECHNICAL SPECIFICATION

Scroll to Top