SS 304 bowl design in three sections i.e Flat bottom, cylindrical mid portion and conical top portion for efficeint mixing operation & provided with counter balanced lid. Lid provided with vents, view ports & charging openings.

The main impeller consists of dual speed 750/1500 synchronous dual HP TEFC motor, coupled through a belt drive to a worm reduction gearbox with chain coupling. The impeller is designed to provide mixing at the bottom and at the centre of the bowl and is driven through a specially designed bearing housing that facilitates inside wash facility for quick change over and also prevents leakage of powder from bottom entry and leads to longer life gear box.

The chopper drive consists of dual HP speed (1400/2800 synchronous speed)TEFC MOTOR. The motor shaft is of SS and the chopper has specially designed 4 blade SS impeller. The shaft is integral with the motor. The assembly mounted horizontally into the bowl.

• Actuators for ON/OFF, slow, fast operation.
• Auto/manual controls.
• Timer.
• Indicator lights.
• Ammeter/Voltmeter for both motors.
• Controls for discharge opening/closing.
• Air regulator & Pressure gauge & air filter.
• OPTIONALLY
• A PLC based control panel can be provided.

Main panel consists of all prewired connections and it has only to be connected to the electrical supply. The circuits consists of MCCB and the relay. Wires coming out of the connections are numbered for easy recognition.

• Air purged shaft seals eliminating powder entering the seal.
• Built-in cleaning system for both shaft seals.
• Layouts to suit individual requirements possible.
• Machine can be provided with loading & unloading units to form an assembly line & reduce material handling (Optional feature).
• Fenner taper lock pulley on main drive to reduce vibration and better transmission efficiency.
• Main Bearing Housing provided with 3nos Oil seals and sleeve to minimize powder leakages / cross-contamination.
• Chopper motor with built-in SS shaft to eliminate roller, bearings and reduce maintenance.
• Main panel provided with pressure switch control for proper functioning of the machine at desired pressure of air only to prevent powder entry into impeller and eliminate jamming of impellers.
• Circuit provided with interlock contactors so that chopper cannot operate directly, independently.
• Discharge plunger provided with 3 position solenoid valve to open and close at desired levels, thereby regulating the discharge and preventing discharge of large lumps.
• Pneumatic circuit provided with non-return valve and water inlet/outlet connections for facilitating washing of the main impeller assembly without dismantling to facilitate faster changeover.

• Locking arrangement for motor to eliminate accidentally starting with open lid.
• Enclosed moving parts.