Shashvath Fabrication and Engineerings

  • Vasai -E, Maharashtra 401208 India
  • sales@shashvathfab.com
  • 088885 11188
Facebook Twitter Youtube
Request Quote
  • Home
  • Sterile Manufacturing Vessel

Our Product Range

STERILE MAGENTIC MIXER

Magnetic Mixer has a drive mechanism that can be removed quickly and easily – a major advantage, because small vessels can then be autoclaved rather than sterilized-in place (if preferred). All product contact parts are stainless steel 316L, with special grade tungsten carbide bearing surfaces.

These allow smooth trouble free operation and are an integral part of the impeller head and carrier. The open impeller design allows easy cleaning and can easily be removed for separate cleaning and sterilization.  Magnetic Mixers are fully engineered & designed for better CIP/SIP compliances.

TECHNICAL SPECIFICATION

It should be noted that higher is the viscosity , lower is mixing capacity of Mixing head. Therefore,  selection of Mixing head is based on media Viscosity & demand of mixing application.

NOTE

  • The mixing capacities above are based on aqueous like products with a density of 1000kg/m3 (S.G.=1) and a viscosity of 1cp.
  • Typical applications for ‘Gentle’ mixing are where solids are held in suspension.
  • Typical applications for ‘Blending’ are where soluble liquids are mixed together or where powders easily dissolve into the liquid.
  • Typical applications for ‘Vigorous’ mixing are where a vortex is required for blending of powders into a liquid

HIGH SHEAR ONLINE MIXER

SHASHVATH has substantial experience in designing, fabrication, erection & commissioning of Large Volume Parental Mixing Solution System based on Online High Shear mixing Technologies. In this design, no internal agitators are fitted which leads to no cross contamination & deviation in cleaning validation. Entire vessel from inside is electro polished leaving no space of crevices & ridges henceforth no place for any bioorganic to exist. This design is economical in investment & have far better flexibility in batch size variation as High Shear Homogenizer / Emulsifier is externally fitted in re-circulation. Online temp. mapping of re-circulatory pipe line & all points well within tanks are there for cleaning validation. Head of external homogenizer is quick release type & compatible to sterilization. Agitator seals are capable of sustaining Pure steam pressure for SIP cycle.
Better & faster dissolution of solute into main WFI stream is achieved in this design as mixing is done at higher RPM & re-circulation of mixed liquid is at tangential position in tank. Therefore vortex created also enhances mixing.

CONSTRUCTION DETAILS

  • Inside the Online Homogenizer, there is provision of 2 stage to 4 stage disintegrating head which are capable of dissolving any solute by high shear impact made of 316L stainless steel housing.
  • Entire Mixing Tank is design of internal pressure for SIP cycle & for Vacuum application also.
  • A drive unit mounts externally to the vessel and can be quickly and easily removed using a TC type  connection. This is particularly useful when sterilizing the vessel & autoclave for Homogenizer parts.
  • The vessel can be cleaned in place (CIP) using spray balls and/or by immersion in a cleaning fluid. For maximum effect rotating type spray heads are recommended. Sterilization in place (SIP) is possible with temperatures up to 145°C.
  •  A wide range of operating controls are supplied from a simple stand-alone panel to a fully integrated automation system.
  • The Ultra Clean Mixer has been designed to meet the critical standards of the Pharmaceutical and Biotech industries
Scroll to Top